Menu

Filters

  • Result Found In

KeyPrint
Dentsply Sirona inLab MC X5

Dentsply Sirona inLab MC X5

Dentsply Sirona
Dentsply Sirona inLab MC XL

Dentsply Sirona inLab MC XL

Open for precision and speed

inLab MC XL is the fast wet milling and grinding unit with many production options for your dental laboratory. You benefit from high speed and precision and can switch from grinding to milling in just a few steps. The large selection of materials and many uses give you particularly flexible and efficient production options.

Benefits:

  • Universal production unit for a wide variety of materials
  • Precise: Fine-tuned, 4-axis machining of blocks. The inLab MC XL is characterized by precise wet machining. Especially when processing glass ceramics, the grinders use can be as small as 0.6 mm—for restorations with maximum detail in the occlusal and interproximal areas and at the preparation margin.
  • High-speed grinding: Glass- and hybrid ceramic restorations can be produced at a previously unachievable speed with simultaneous double four-axis processing. A fully contoured Celtra Duo crown takes less than 10 minutes. This is a key success factor for potential new business models that can call for providing digital impression orders within an hour.
  • Open for imported STL restoration data: inLab MC XL produces restorations perfectly in tune with the inLab CAD SW. Alternatively, you can import restorations in STL/XML format from other CAD software such as exocad®, 3Shape®, etc.*

Indications:

  • Veneers
  • Inlays
  • Onlays
  • Crowns
  • Copings
  • Bridge frameworks
  • Bridges
  • Telescopes
  • Attachments
  • Abutments, milled from meso blocks
  • Bars
  • Surgical Guides (single)
  • Models

Technical Data

General inLab MC X5 inLab MC XL
Width 590 mm 700 mm
Height 810 mm 425 mm
Depth 580 mm 420 mm
Weight 87 kg 43 kg
Required compressed air pressure min. 7bar -
Required compressed air quality min. 50 l/min* -
Noise level <63dba <65dba
Kinematics
Axes 5 4
Angle of incidence for A axis 360° +/- 180°
Angle of incidence for B axis +/-20°** 15°
Material Types
Zirconium oxide x x
PMMA x x
Wax x -
Composite x x
Hybrid ceramics x x
Glass ceramics (with wet option) x x
Lithium disilicate ceramics (with wet option) x x
CoCr sintered x x
Titan Preforms x -
Material Forms
Blocks 40 x 19 x 12 mm 85 x 40 x 22 mm
Max number of blocks per process 6 1
Discs (Form) 98/98,5mm with collar -
Discs (Height) up to 30mm**** -
Material openness Yes Not explicit
Tool Management
Automatic tool changing Yes No
Max number of tools per process 6 2(4)
Changeable tool magazine controlled in SW Yes No
Indications (inLab CAD)^1
Veneers x x
Inlays x x
Onlays x x
Crowns x x
Copings x x
Bridge frameworks x x
Bridges x x
Full-jaw bridges x -
Telescopes x x
Attachments x x
Abutments, milled from meso blocks x x
Abutments, milled from disks x -
Implant bridges x -
Bars x x
Splints x -
Surgical guide (single) x x
Surgical guide (multiple) x -
Models - x

For more information, contact your Zahn Prosthetic Specialist:

Phone:1-800-496-9500