The most trusted chairside CAD/CAM material

• IPS e.max is the top-selling glass-ceramic in the world, combining outstanding esthetics and strength designed to mimic nature. With over 170 million restorations placed, every 10 seconds a patient is made happy with IPS e.max^[1]. Its clinical reliability is proven with a 97.2% clinical survival rate of posterior crowns over ten years^[2], over 15 years of in vitro studies, and a 98% customer satisfaction rating^[1].
• Strict testing and quality control measures ensure the highest quality dentists, dental laboratories and patients know and trust. Tested according to ISO 6872 specifications, IPS e.max CAD exhibits an average flexural strength of 530MPa^[3] and fracture toughness of 2.11^[4]. This qualifies it as a Class 3 dental ceramic which is indicated for single units including molars, three unit anterior bridges and conventional or adhesive cementation^[5]. Crowns only require 1.0mm occlusal thickness when bonded or 1.5mm with conventional cement and a retentive prep.
• Its wide variety of indications, shades and sizes make it an incredibly versatile operatory companion which can accommodate the majority of restorations fabricated chairside. It comes in 54 shades and 6 block sizes including pre-fabricated abutment blocks and can be milled and crystallized with spray glaze in under 20 minutes^[6,7].

Ultimate strength with chairside speed

• IPS e.max ZirCAD provides an option to process chairside zirconia easily and quickly with the Programat® CS6 furnace which features vacuum-assisted sintering for increased speed and translucency. IPS e.max ZirCAD LT blocks are pre-shaded and can be stained or simply polished.
• They are comprised of high-strength 3Y zirconia with a flexural strength of 1200 MPa ^[8] and fracture toughness of 5.1 ^[9]. This makes it a Class 5 dental ceramic per ISO 6872 which enables utilization for >4 units including molars and conventional or adhesive cementation. The high strength of IPS e.max ZirCAD permits thin wall thicknesses (posterior crowns occlusal and/or central fissure 0.6 mm, anterior crowns 0.4 mm) and tooth preservation.
• IPS e.max ZirCAD can be seated using conventional, self-adhesive, or adhesive cement, e.g. with RMGI ZirCAD® Cement, self-adhesive resin cement SpeedCEM® Plus or Variolink Esthetic adhesive cement.

Amazingly simple esthetics

• The official cement of IPS e.max, Variolink Esthetic is an esthetic light- and dual-curing adhesive cement for the permanent cementation of ceramic and composite resin restorations.
• Variolink Esthetic sets a new standard for easy removal of excess material, making esthetic cementation simple. A simple clean-up process has been achieved with the smart combination of Ivocerin, the light initiator, and a unique light sensitivity filter. This allows quick and east tack curing for removal which is so satisfying. Fast and reliable final polymerization is ensured with patented Ivocerin technology.
• Its 100% amine-free Ivocerin® light initiator provides ultimate shade stability without concerns of shade-shifting. Additionally, the easy shade concept and try-in pastes come in 5 customizable shades in order to enable precise shade and value matching.
• Variolink Esthetic also features a high radiopacity of nearly 350% Al which greatly exceeds enamel at 200% Al and dentin at 100% Al ^[10]. This is especially beneficial when using with radiolucent dental materials to ensure marginal fit.

Self-adhesive cement

• SpeedCEM® Plus is a self-adhesive, self-curing resin cement with optional light-curing designed for the permanent seating of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials:
• Zirconia
• Metal and metal-based restorations
• Lithium disilicate glass-ceramics, e.g. IPS e.max®
• SpeedCEM Plus comes in three convenient shades to enable versatility while also providing a slight chemical bond when needed or preferred.
• Given its self-adhesive properties, SpeedCEM Plus offers an additional measure of reliability when seating opaque restorations such as zirconia. It also eliminates the need for phosphoric acid etching and bonding with a dentin adhesive. No additional primer is required for the self-adhesive cementation of zirconium oxide and metal-based restorations. This is also true for the placement of restorations on titanium or zirconium oxide abutments.

Resin-Modified Glass Ionomer

• ZirCAD Cement features one esthetic shade in an automix syringe. Its seamless removal via quick tack-cure makes it the efficient and economical solution for zirconia restorations with retentive preps.
• It features high fluoride release and is hydrophilic in nature, making it ideal for high caries risk patients and in situations where absolute isolation is challenging. and economically efficient type of cementation for restorations made of zirconia.
• Designed for strictly mechanical retention, it enables less challenging removal when needed.
• Conventional cementation from the premium brand you trust: Ivoclar Vivadent

Sculptable Universal composite for the anterior and posterior region.

• Smooth, creamy handling for flawless adaptation and contouring
• Twelve streamlined shades to create esthetically optimized restorations
• High radiopacity to visualize marginal integrity and ensure proper diagnosis in future recalls
• A single shade solution for Class I & Class II restorations (T shade)

• Sculptable 4mm composite for true-to-nature esthetic results in the posterior region
• Long working time (Tetric PowerFill: >3.5 minutes^[5]) for better contouring
• Reliable depth of cure in increments of up to 4 mm^[1–6]
• Natural shade effect thanks to Aessencio technology
• Radiopaque / high radiopacity (> 225%)^{[5, 7]}
• Three-second cure with the Bluephase PowerCure (3s Cure program)[1-4]

Tetric® PowerFlow is a flowable 4mm composite for direct restorative treatment in posterior teeth.

• Material is characterized by low shrinkage, optimum flexural strength and reliable depth of cure
• Excellent adaptation to cavity walls and fast volume replacement because of outstanding flow properties
• Three-second cure with the Bluephase PowerCure (3s Cure program)^[1-4]

Tetric EvoCeram is a state-of-the-art, light-curing, radiopaque, nano-hybrid composite for direct restorative therapy. Tetric EvoCeram cures with light in the wavelength range of 400-500 nm (blue light).